Wildfire

djhgeeodemlfdpmcccdekfalbhllcoim

Record browser actions then replay immediately. Craft your own custom automation workflows.

Latest reviews

• (2023-10-30) Светлана Гурьянова: Не работает. Пытался автоматизировать прохождение опроса. Ррасширение виснет и перестаёт работать
• (2023-03-31) Gibley: время перехода между страницами не работает :(
• (2022-12-13) Артем Романихин: К сожалению не может работать с коммутаторами. Не работает переход со страницы логина :( А так красиво понятно...
• (2022-11-18) iLoveBooBees: DO NOT USE THIS APP. IT IS ALREADY DEAD and ABANDONED. No support provided and no updates for this extension. ALTHOUGH USEFUL FOR BASIC MACRO, WITH TEST EXPRESSIONS, IT IS REALLY DUMB. AND NO UPDATES SO CLEARLY THIS IS A DEAD EXTENSION.
• (2022-11-02) ridho bukan: usefull and clean
• (2022-07-24) Carlos Rivero Siri: I have during several years tried different plugins/software with macro capabilities. Wildefire is the only one I manage to actually doing what I want it to do. Possible due to the fact that other plugins are a little bit to complicated for me. In my case I have recorded 11 clicks (which has to be done 6000 times a year). This clicks are at different positions and opens different webpages. It is working perfectly. How do you get the plugin to run at maximum speed? Do you need to change som timings?
• (2022-04-17) Natasha Mashkova: Крутое приложение!! Удалось решить задачи по автоматизации, но для масштабирования столкнулся с проблемой, что не смог найти архив с исходниками для загрузки в антидетек браузер. Не совсем удобно устанавливать в каждый браузер по отдельности, особенно если их 100-10000. А так мега удобное и простое в использовании приложение!! Спасибо
• (2022-02-25) Jeinner Campos: I tried using this addon to automate inmails on Linkedin Recruiter. The main issue is that the simulation needs to be started with an specific URL and runs the steps on the same url you initially tested. The only way advanced automation works is if you can run it from whichever page you want, that's where the dynamic work starts. If the simulation runs only on the same page as initially tested or, it runs like a new simulation instead of running over the page you want (new page url every single time) then, this won't do it.
• (2021-10-22) Pongsatorn Triyaluck: Not Easy to use but Work! Thank
• (2021-10-19) Alexandre Malaquias: Muito bom!
• (2021-08-20) Murtaza Ali Sharieff: If your macro needs a page change, it hard codes the new page change URL. Even though I need to CLICK an item and then make changes on the new page. That opens. Nice try, but fail... sorry.
• (2021-06-21) Jonathan Fang: Works well but some websites username and password not accepted? Could there be any reasons for this -"invalid password"
• (2021-05-14) Krystyna Kotolevska: Утром работало, вечером после рекординга открывается пустое окно приложения и даже крестик не кликнуть. приходится диспетчер задач запускать чтобы убрать. Ну и то что пару раз случайно записалось и открылось, не понятно. на странице несколько инпут полей и кнопок. в одном поле надо поочереди вписать цифры от 1 до 9 и после каждой нажать кнопку. при старте процесса записывает эти цифры сразу во все инпут поля... короче ищу другое расширение. это бесполезно.
• (2021-05-13) Unknownoof: Great App Allthough You Should Beable To Chose how many times u can make it repeat that would bring my review from 4 stars to 5 but other then that works great
• (2021-05-07) hinter land: The copy function doesn't seem to work correctly. I'm using text select right before copy but it can't seem to copy the text of the element.
• (2021-04-22) A Jorgena: Only thing I don't like about this app is the fact that it loads in a separate window. This causes issues when trying to record scrolling pages where the page loads as one scrolls further down the page. I'd love to be able to record exclusively on my open active tab, this was I could preload the entire page before hand.
• (2021-04-14) Gustavo Ibarra: Hi. Is it possible to export the Event Log as actions for Puppetteer? Right now, it seems that I need to manually copy each selector.
• (2021-03-25) Pink Moros: Not open source.
• (2021-02-01) ekarron: It has a great potential if the dev didn't just bail on it. Still needs a lot of work. Pros: - User friendly - Nice design and the best work editor Cons: - Lack of forums and tutorials - Slow when playing the recorded action - no loop (?) - maybe this is a bug that will be resolved but there is an option to assign keyboard shortcut for recorded action but it doesn't work (?)
• (2021-01-24) Bart Gibby: Ian, I really love this extension. I have spent all day looking at tons of paid macro or automation tools and I think your is by far the easiest to use out of the box. Especially for free, I hope you get a paid version soon so we can enjoy more features! Also The venture capital website you use for the scrape into google sheets no longer functional. I am trying to take a screen shot but that page in the documentation is missing. Could you please add it back?
• (2021-01-09) Davoud Abedi: It's a bit slow, I expect to run recorded macros faster.
• (2020-11-22) しゃかりきコロンブス: まともに記録せず、動作もしない 座標を打ち込み、クリックすると言うことすらできない タイマーはうんともすんとも言わない
• (2020-10-23) Nicole Fryar: Tried several times. Couldn't get it to work.
• (2020-09-18) AKS UA: Ужасно, когда ты пытаешься ходить по гугл доку открывая ссылку, делая на новой вкладе 2 действия, закрывая вкладку, и переходя на следующую вкладку. Но нет же, мы запишем не порядок твоих действий, а будет открывать одну и ту же ссылку первую!!! Невероятно неудобное, редактор не знает что такое ctrl+z, не говоря о остальных командах. Я разочарован, это после рекламы то "Лайфхар"а
• (2020-09-15) Hyder Mohammed: Doesn't work anymore!
• (2020-09-04) News Mog (GG): Нет русификации,как и каких-либо нормальных гайдов. Переход по url?Что за бред?Практически всегда хватает клика на элемент. Вообще не может работать с открытием в другой вкладке или окне. старый imacros был лучше,увы 3 за старание и визуальное создание задачи
• (2020-08-29) Mosantique Ru: Great app
• (2020-07-29) Mark Buse: Claims to record keystroke and mouse actions in Chrome, but does none of that. It's either buggy or a fraud.
• (2020-04-03) Якась Особистість: Долго копался и искал в инете, как записать и выполнять простую последовательность действий в браузере.Очень удобный и наглядный редактор, никакого нагромождения лишних настроек, ровно то, что нужно для работы. Сделал макрос за 5 минут, буду пользоваться всю жизнь. Разработчику - низкий поклон!
• (2020-04-02) Wesley David: I wan't to love this, but there is no way to speed up your simulation. The whole point of this is to be able to re-run a set of commands in a fraction of the time. All this does is replay the actions exactly at the same speed you delivered them. Not useful at all as a developer.
• (2020-03-06) N Gergely: There is no option to set name for the simulations. Also very difficult and complicated to select and replay simulations. Just a simple dropdown with names would be useful.
• (2020-02-24) Alex: No way of running a simulation multiple times (looping), therefore it defeats the purpose in my usecase.
• (2020-02-12) Vusal Abbasov: At last I found. It's the easy, enjoyable and best way for automation website.
• (2020-01-17) кура секс: Открыл вкладку, прокликал всё что надо и радостно закрылся. Каво? Нахрена мне закрывать вкладку, если я этого не записывал. Дно какое-то, надо работать в активном окне, а не новое открывать, если тебя не просят об этом.
• (2020-01-01) Лёша Самутин: Приложение просто супер,очень помогает где нужно автоматизировать однотипные действия. Единственная просьба сделать возможность устанавливать самому время повтора,а не выбирая из списка. К примеру у меня из-за того некоторое время простои выходят при использовании данного приложения(хоть они и есть,но я всё равно рад что их можно как-то автоматизировать). The application is just super, very helpful where you need to automate the same type of action. The only request is to make it possible to set the repeat time itself, rather than choosing from the list. For example, I have because of some time just come out when using this application(although they are, but I'm still glad that they can somehow be automated).
• (2019-12-26) Олег Барминов: Хорошее расширение, мне помогло решить проблему, нужно было хук в woocommerce прогнать руками 1000 раз. А тут решение. Супер!
• (2019-11-05) Matthew Schulz: It doesn't record anything, such as mouse clicks when in a Jacascript program.
• (2019-09-16) Илья Сахнов: Все супер! Только добавьте в расписание возможность корректировки времени и выбора нескольких дней!)))
• (2019-09-06) Vladislav Zharkov: Крутая приложуха. Может работать переключаясь между вкладками браузера, для меня это важно.
• (2019-08-13) Никита Марков: Пользовался долго, было все хорошо, сейчас начал вылетать и отключаться из расширений хром, пишет, что ошибка (приложение могло быть повреждено)
• (2019-07-23) Pratik Nalage: Is it open source? Which license does it uses?
• (2019-07-18) Kalebe Maynard: O mais completo pra automatização de tarefas! só faltou ter tradução PT-BR!
• (2019-05-14) Adem Demir: Very nice plugin for testing.
• (2019-05-05) Ethan Pepper: Needs some more advanced tutorials and a dedicated community forum. Has great potential!
• (2019-04-17) Димитрий Андрусяк: отличная штука
• (2019-03-04) vasiliy ustinov: Чет не понял ничего. Ну записал действия, ну включил. Открылось коно программы в фул размере. Что то помолчало и закрылось типа сделало. Нужно было в хроме на одной странице кликать в игрушке раз в минуту по определенным участкам. Я так и не понял что это за приложение и что оно делает. Удалил.
• (2018-12-26) Alexander Glimakov: отличное расширение для фотостраны!
• (2018-12-19) HardStyle: Отличное расширение. Разработчику 5 звёзд!
• (2018-11-14) Damian Konczak: Works great, but why does it always reload the page before running the simulation? Is there an option to do the clicks right away, without reloading the page?
• (2018-08-11) Stanislav Angelkov: it simply doesn't do anything...

Latest issues

• (2023-08-24, v:1.3.10) Heidi Lee: Scheduled Simulations
  Simulation is not running at schedule time (9:01 PM) Either runs at odd time, or not at all.
• (2022-10-18, v:1.3.10) Faiz Sheikh: Doesnt record right click, Also recording key also dont include right click key
  Does it not record right clicks? I want to record right click on a webpage and then click an item from the right click menu. Is it not possible?
• (2022-05-28, v:1.3.10) Pedro Maia: Scheduled simulations don't start sometimes
  Hi Wildfire team Thanks for this great extension. Here's my cry for help :) I have 2 simulations scheduled. The simulations are scheduled to run every 24 hours. The simulations run with no problems for 1 to 2 days, but after that, the simulations simply don't start at the scheduled time. The simulations (at least one of them) run at 1:00AM, which is not the time I have configured (4:36PM and 4:44PM). Taking a wild guess, it may be related to the fact that PC time is configured in 24h format as opposed to 12h format used by the extension. Could you help please? Thank you in advance Regards Pedro
• (2022-04-17, v:1.3.10) Natasha Mashkova: архив для установки приложения в антидетект браузер
  для работы с большим количеством аккаунтов не совсем удобно устанавливать его в каждый браузер. Для антидетект браузеров можно установить некоторые приложения во всех браузерах одновременно. Для этого необходим архив самого приложения, его можно где-то найти?
• (2022-03-10, v:1.3.10) Naiyma Wright: scheduled task
  This app would be perfect if I could manually schedule the simulation. Under the schedule options You have that it can be done every 1 hour , 4 hour ect. But what if I wanted to run it every 1 and a half hours or 2 and a half hours? I wish I had the option to type in the time I want it to repeat my simulation.
• (2022-01-23, v:1.3.10) adrien favrot: Je veux exercer mon droit de suppression des données
  Bonjour, votre extension s'active sans droits et je suis dans l'obligation de vous demander la suppression de l'intégralité des données me concernant. Merci de tout supprimer. Cdlt
• (2021-07-21, v:1.3.10) Krzysztof Maliszewski: How can I run a simulation on an opened site?
  How can I run a simulation on an opened site? What I mean is, I have a site opened; starting a simulation opens a new instance of the site what I don't want to because it must run on the already opened site. Thank you!
• (2021-07-15, v:1.3.10) Johannes Zugluft: Wildfire doesnt recognize a switch between windows?
  How can I make sure that Wildfire recognizes when im moving from window 1 to window 2?
• (2021-07-13, v:1.3.10) Дмитрий Исаев: Workflow Editor
  Hello, how can I input "variable" to "CSS Selector"? Example. I got a variable named "prop1" whith value "arrFilter_10870_166326444". I need to put "PROPERTY_10870-checkbox" to CSS Selector. How can i refer to 10870?
• (2021-07-03, v:1.3.10) margaret rosita hector: macro
  Intro:Hey im soran.A guy who's A very big fan i consider Myself your biggest/Most Supportive Though clearly i aint your Only fan but I really really truly Do Like this Amazing chrome Extension i support your work with my All Literally All of me and i surely do wanna see it progress Further then fully Succeed i believe in progress cause Being on the same Level for All existence wouldnt make Sense Now would it so if There was A way to assign automations with A single button press That would be so great Like A button a person wouldnt use on a daily basis like ctrl alt Tab any button out of A way That people type with for any cause wether Texting searching or what ever Else to play out an Automated action a shortcut button basically
• (2021-06-28, v:1.3.10) Matt Y: How can I get macros to run when the computer is asleep or logged out?
  As there is no ghost mouse for Desktop functions I would like to schedule the macros for times when I do not use the computer, but this does not work.
• (2021-05-25, v:1.3.10) Sam Nacino: Process leads me to a different result or the page says "session expired"
  I'm a data analyst so I need to visit statistics websites all the time. I have one market namely Nigeria that encounters this issue. Website: http://statistics.cbn.gov.ng/cbn-onlinestats/DataBrowser.aspx I have made workflows for the indicators I need, and they worked fine a while ago when I tested them. Now that I am using them they won't deliver results. When I try to navigate manually, it'll work and show results, and when I try to use the workflow for another indicator, it'll show the results of the indicator I navigated manually. Is this a problem of the extension or what work around do you suggest I can do? Thank you!
• (2021-05-07, v:1.3.10) hinter land: Copy Function does not seem to work
  Copy Function does not seem to work. I used the text selector before it but it doesn't seem to work. If this problem is due to user ignorance could you post an example with the copy function being using correctly?
• (2020-12-22, v:1.3.10) Ashley Zilinskas: Cannot access wildfire main options?
  I can normally click the icon in my icon tray in google chrome on the top right and be able to select record or check out the main menu and go through options. I can click the icon but nothing happens now. I can't even pull up even the main page. For awhile it was stuck on record and I couldn't figure out why my browser was SO slow. Even exiting the browser didn't work, I can to turn off the extension in Chrome. Any suggestions or did anything change?
• (2020-12-01, v:1.3.10) Charles Read: run simulation and record network traffic in Chrome Developer Tools
  Is it possible to specify an existing window / tab where Wildfire may run a simulation? My use-case is fairly standard: I would like to open a Chrome tab and then open Developer Tools for that tab, start recording network traffic, run the simulation, stop recording network traffic, and then post-process the network traffic recorded by Chrome. Thanks for looking into it!
• (2020-09-30, v:1.3.10) Javier Rubino: Wildfire for Android
  I want to execute Wildfire in a Android phone but I can't to install this extension, is it posible? If this is so How can a do that? Thanks in advance.
• (2020-09-10, v:1.3.10) Elisabeth Gruskin: does it work on google chrome
  I have to go on a website with a password, click some buttons and then use a pull down menu to go through several other buttons and extract data several times but it has to be done in chrome. Thanks, Elisabeth Paige
• (2020-09-07, v:1.3.10) Ofer Hazon: URL parameters comparison
  Does this tool can compare parameters *inside* a url to expected results?
• (2020-07-30, v:1.3.10) Алекс Савченко: Using the date as a variable
  Hello, friend! Can you help me, I can't figure out how to use the current date as a variable. I need to upload a weekly report every day. To do this, I need to set the current date and the date from a week ago. Is it possible?
• (2020-06-23, v:1.3.10) Andrey Simakov: Use with another Chrome extension
  I can't automate screenshot process with another Chrome extension. My workflow is: — import CVS with structure `Page URL;Page slug` — open a page in with `Page slug` — make a full page screenshot with Screenshot Master extension — save a screenshot with given `page slug` — repeat
• (2020-05-14, v:1.3.9) Chistopher Pepper: Where are the files stored?
  I am recording steps for a CRM installment and the information needs to confidential. Where does the extension store the recordings?
• (2020-03-28, v:1.3.9) jaba daba: Custom function doesn't work if I put more than 856 characters in the script.
  This extension is awesome and very helpful but recently I've found a bug.Custom function doesn't work if I put more than 856 characters in the script.I verified if it is true and It is true.
• (2020-02-21, v:1.3.9) Alexander Reece: Software License
  Hi, I was wondering what license is this software under? It looks like a great tool to use! Cheers, Alex
• (2020-01-24, v:1.3.9) Craig Crawford: Freezing Chrome when executing custom code
  I'm trying to execute the below snippet of code using the "Custom Function" - but when it runs, Wildfire locks itself and Chrome up. Any ideas? var $; (function () { var script = document.createElement("script"); script.src = "https://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js"; script.type = "application/javascript"; document.head.appendChild(script); })(); $ = window.jQuery; var extendBtn = document.getElementById('dp-instance-extend-button'); var parentElement = $(extendBtn.parentElement); if (parentElement.hasClass('ng-hide')) { parentElement.removeClass('ng-hide'); }
• (2020-01-21, v:1.3.9) sam sirious: Java Code
  Hello there.. I`m stuck at using java script at the custom function node.. especially i want to print the actual date.. could you help me with that? or send me an example how to use java code in general with wildfire? cheers :)
• (2019-10-13, v:1.3.9) Konstantin Rubikoff: Registrations are currently unavailable.
  https://cloud.wildfire.ai/register/ не могу зарегестрироватся( I can not register (
• (2019-10-13, v:1.3.9) Konstantin Rubikoff: How to coped selected text?
  How to coped selected text in buffer? Then in the new window paste into the search, well, I did it, but the selected text is not copied ( to coped selected text in buffer?
• (2019-09-14, v:1.3.9) Brandon Tudisco: Wildfire keeps getting disabled
  So wildfire keeps getting disabled almost daily. Is there any thing I can do to stop that from happening?
• (2019-09-06, v:1.3.9) balu Gottipati: Extension Corrupted
  Extension gets corrupted almost everyday. I had to click repair to use it again? Is there any fix to this?
• (2019-08-28, v:1.3.9) Enrique Hidalgo: No carga las imagenes en un portal de anuncios clasificados
  No carga las imagenes en un portal de anuncios clasificados. No realiza la subida de imagenes del formulario. Explicar por favor como solucionarlo
• (2019-06-09, v:1.3.9) T W: Custom function
  I have added a custom function to the workflow and then tried to test it by adding simple code into the Code box. The code disappears after the workflow simulation is run. There appears to be no guidance on suing the custom code node. What I am trying to do is simulate a CTRL+S keypress to save a pdf file that I want to download. I have also tried the keypress node but without any success. Please can you advise me.
• (2019-05-02, v:1.3.9) F A: Как зациклить?
  Как зациклить действие в вашем приложении?
• (2019-02-28, v:1.3.9) Chrome crashed while over 1 or 2 days run!
  Hi I am running a routing job by wildfire every minute. It is basically have only a few steps which is to check my login status of a website and try login if offline. The problem is when it run 1 or 2 days, it will make chrome crashed. And I found the issued is happened with the memory usage is higher and higher while running. Do you have any idea that can improve this? Thx Larry.
• (2018-12-01, v:1.3.9) Satir: Threads and time of start
  Can you help me to figure why can't I start two simulations at same time? Problem is when I make sheduling two workflowes that must be started at same time (ex. every 15 minutes) but "Workflow" can't run both of them and trys to start them one-by-one. After it's start of the first of them "Workflow" replaces all recorded steps by recorded steps of the second workflow and initiate conflict that blocking both jobs. Result is simulations window that can't be closet automaticaly and without any tabs. At the "Simulation log" I see some proof of my theory about this problem. It sounds some like "No links found". There is solution of this problem on my mind. It's permission to run few tasks with new thread for every of them. There is one more problem. I don't like that I can't write time of start by myself. For exsample, If I need to start simulations every 10 or 25 minutes - why i can't specify it's by myself? Can you, please, make some changes in sheduling process itself. I mean allow to users choose time of task run from list like it's now but add ability to set it by user's needs.
• (2018-09-12, v:1.3.9) roshan karia: run macro via URL
  I wanted to be able to run a macro via a URL so I can hook it up to a Windows Task Scheduler (so macro will run if browser is closed or macro to run next time computer is switched on). Ive added the following to the code to allow this (im not a proper coder): run_fav.js (new file): if (window.location.hash.search("#wildfire-favorite-") != -1 ) { begin_sim_with_option(window.location.hash.replace("#wildfire-favorite-","")); } run_fav.html (new file): blank page that adds run_fav.js script thus macro can be run by: {Internal UUID}/run_fav.html#wildfire-favorite-0